Aluminium Roller Shutters

Aluminium Roller Shutters

  • 6 Types Available
  • Manufactured Onsite

Aluminium Roller Shutters
The CSS Range

We have several Aluminium Roller Shutters in our range, take a look through them below.

Commercial & Retail Aluminium Roller Shutters

Contact our team to get a quote on 0800 998 1304.

Aluminium Roller Shutter CSS38

Sash Cord, Manual Spring or Electric Curtain Slat. The CSS38 uses a double skin extruded aluminium slat.

The bottom slat is extruded aluminium with reinforcing angle. Available with rubber in place of reinforcing angle as a no cost option. The shutter box has die cast aluminium end plates with two piece roll formed aluminium casing. Larger sizes will be supplied with zinc plated steel end plates.

The guide rails are also extruded aluminium with a box section for fixing/reinforcement and high density 5mm pile brush seals. H30 guide profile as standard.

Options; Lath can be punched / perforated and punched and glazed if required, remote control, group command operation.

Aluminium Roller Shutter CSS381 (LPCB 1175-1 approved)

Manual Spring or Electric Curtain Slat. The CSS381 uses a double skin extruded aluminium slat fitted with antivandal windlocks.

The bottom slat is extruded aluminium with steel reinforcing angle. Supplied with a lock in the bottom slat unless bullet locks are requested (surcharge). The locks must be disengaged before operating the shutter or the motor will be damaged. The shutter box has steel end plates with two piece roll formed aluminium casing.

The guide rails are H40/S high security guides reinforced with steel sections at the base.

Aluminium Roller Shutter CSS150

Sash Cord, Manual Spring or Electric Curtain Slat. The CSS150 uses a double skin foam filled aluminium slat.

Spring and lock operated shutters are supplied non-vented as standard, all other operations are supplied vented as standard but also available non-vented. The bottom slat is extruded aluminium with rubber bottom seal. The shutter box has die cast aluminium end plates with two piece roll formed aluminium casing.

The guide rails are extruded aluminium with a box section for fixing/reinforcement and have high density 5mm pile brush seals. H25 guide profile as standard.

Optional Extras; Remote control, group command operation

Aluminium Roller Shutter CSS60

Electric Only Curtain Slat. The CSS60 uses a double walled aluminium slat.

The bottom slat is extruded aluminium with reinforcing angle. The shutter box has die cast aluminium end plates with two piece roll formed aluminium casing. Larger sizes (shutters with a curtain weight of 75kg upwards) will be supplied with zinc plated steel end plates. The guide rails are extruded aluminium with a box section for fixing/reinforcement and have high density pile brush seals.

UPH140 guides supplied with 205mm box, UPH240 guides supplied with 250, 300 and 350mm box.

Aluminium Roller Shutter CSS80

Electric Only Curtain Slat. The CSS80 uses a single walled extruded and punched aluminium slat.

Solid slats are always used within the shutter box, part of a solid slat may be visible on a completely punched curtain. The bottom slat is extruded aluminium with a rubber bottom seal. The shutter box has die cast aluminium end plates with two piece roll formed aluminium casing. Larger sizes (shutters with a curtain weight of approx. 75kg upwards) will be supplied with zinc plated steel end plates.

The guide rails are extruded aluminium with a box section for fixing/reinforcement and have high density 4mm pile brush seals.

UPH250 guides supplied as standard.

Aluminium Roller Shutter CSS90

Electric Only Curtain Slat. The CSS90 is constructed from a combination of extruded aluminium links and hinge section.

Link spacing is 150mm in line as standard, however a brick bond pattern (no surcharge), 75mm spacing (surcharge) and solid slat profile (surcharge) are also available. The bottom slat is extruded aluminium with reinforcing angle with no seal. The shutter box has die cast aluminium end plates with two piece roll formed aluminium casing. Larger sizes (shutters with a curtain weight of approx. 75kg upwards) will be supplied with zinc plated steel end plates.

The guide rails are extruded aluminium with a box section for fixing/reinforcement and have high density 4mm or 7mm pile brush seals.

UPH140 guides supplied with 205mm box, UPH240 guides supplied with 250 and 300mm box. UPH250 recommended on wider shutters and for shutters requiring higher security with 250, 300 or 350mm box.

For more information or to get a quote, contact the team on 0800 998 1304 or email us.

Request a callback

Fill in your details bellow and one of our advisors will contact you

CE Contractors Health & Safety Assessment Scheme Health & Safety Systems Citation Approved ISO 9001 Registered Construction Skills Certification Scheme IPAF ISO14001:2004 Certified Company NVQ SPA Passport Site Supervisors Safety Training Scheme SSSTS UKpia

Top

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, assist in our marketing efforts, and for personalised advertising.

More Information Accept All Cookies